M6-39P1 Rotek Slewing Ring Bearings
| Brand Name: | Rotek |
| Model Number: | M6-39P1 |
| da: | 82.55 mm |
| Da: | 160 mm |
| Ca: | 49.809 mm |
| A1: | 98.425 mm |
| A2: | 149.225 mm |
| ba: | 34.925 mm |
| H: | 192.484 mm |
| H1: | 101.6 mm |
Product Details
| da | 82.55 mm |
| Da | 160 mm |
| Ca | 49.809 mm |
| A1 | 98.425 mm |
| A2 | 149.225 mm |
| ba | 34.925 mm |
| H | 192.484 mm |
| H1 | 101.6 mm |
| H2 | 41.275 mm |
| J min. | 260.35 mm |
| J max. | 298.45 mm |
| L | 349.25 mm |
| N1 | 22.225 mm |
| R1 | 60.325 mm |
| R2 | 27.781 mm |
| RG | 3/8 NPT |
| PG | 1/8 NPT |
| h | 38.1 mm |
| Housing | SAF 518 |
| Stabilizing ring | 2 x SR-1518 |
| Labyrinth ring | 2 x LOR 189 |
| End plug (suffix Y) | EPR 11 |
| Bearing limiting speed | 5300 r/min |
| P60° | 121 kN |
| P90° | 72.5 kN |
| P120° | 45.4 kN |
| P150° | 40.5 kN |
| P180° | 49.8 kN |
| Pa | 8.1 kN |
| Mass pillow block | 21.3 kg |
| Cap bolt | 2 x 5/8-11 UNC |
| Cap bolt recommended tightening torque | 149.1 N·m |
| Cap bolt, SAE grade | 5 |
| Appropriate attachment bolt size G | 0.75 in |
| Initial grease fill | 286.33 g |
60.30.0550.100.11.1504 Standard 5 Slewing Ring Bearings
62.20.0544.500.01.1503 Standard 5 Slewing Ring Bearings
62.20.0544.575.01.1403 Standard 5 Slewing Ring Bearings
232.20.0500.503 Type 21/650.2 Standard 5 Slewing Ring Bearings
232.20.0500.013 Type 21/650.2 Standard 5 Slewing Ring Bearings
232.21.0575.013 Type 21/650.2 Standard 5 Slewing Ring Bearings