L6-37E9Z Rotek Slewing Ring Bearings
| Brand Name: | Rotek |
| Model Number: | L6-37E9Z |
| da: | 101.6 mm |
| Da: | 200 mm |
| Ca: | 62.789 mm |
| A1: | 120.65 mm |
| A2: | 165.1 mm |
| ba: | 42.069 mm |
| H: | 239.316 mm |
| H1: | 125.425 mm |
Product Details
| da | 101.6 mm |
| Da | 200 mm |
| Ca | 62.789 mm |
| A1 | 120.65 mm |
| A2 | 165.1 mm |
| ba | 42.069 mm |
| H | 239.316 mm |
| H1 | 125.425 mm |
| H2 | 50.8 mm |
| J min. | 320.675 mm |
| J max. | 368.3 mm |
| J1 | 69.85 mm |
| L | 419.1 mm |
| N1 | 22.225 mm |
| R1 | 67.866 mm |
| R2 | 31.75 mm |
| RG | 3/8 NPT |
| PG | 1/4 NPT |
| h | 45.244 mm |
| Housing | SAF 522 |
| Stabilizing ring | 2 x SR-1522 |
| Labyrinth ring | 2 x LOR 110 |
| End plug (suffix Y) | EPR 13 |
| Bearing limiting speed | 4300 r/min |
| P60° | 149 kN |
| P90° | 89 kN |
| P120° | 55.6 kN |
| P150° | 50.7 kN |
| P180° | 60.9 kN |
| Pa | 12.5 kN |
| Mass pillow block | 33.1 kg |
| Cap bolt | 2 x 3/4-10 UNC |
| Cap bolt recommended tightening torque | 203.4 N·m |
| Cap bolt, SAE grade | 5 |
| Appropriate attachment bolt size G | 0.75 in |
| Initial grease fill | 481.95 g |
60.30.0550.100.11.1504 Standard 5 Slewing Ring Bearings
62.20.0544.500.01.1503 Standard 5 Slewing Ring Bearings
62.20.0544.575.01.1403 Standard 5 Slewing Ring Bearings
232.20.0500.503 Type 21/650.2 Standard 5 Slewing Ring Bearings
232.20.0500.013 Type 21/650.2 Standard 5 Slewing Ring Bearings
232.21.0575.013 Type 21/650.2 Standard 5 Slewing Ring Bearings