A12-125P1 Rotek Slewing Ring Bearings
| Brand Name: | Rotek |
| Model Number: | A12-125P1 |
| da: | 198.438 mm |
| Da: | 339.999 mm |
| Ca: | 101.803 mm |
| A1: | 190.5 mm |
| A2: | 339.725 mm |
| ba: | 80.169 mm |
| H: | 400.05 mm |
| H1: | 200.025 mm |
Product Details
| da | 198.438 mm |
| Da | 339.999 mm |
| Ca | 101.803 mm |
| A1 | 190.5 mm |
| A2 | 339.725 mm |
| ba | 80.169 mm |
| H | 400.05 mm |
| H1 | 200.025 mm |
| H2 | 79.375 mm |
| J min. | 549.275 mm |
| J max. | 619.125 mm |
| J1 | 114.3 mm |
| L | 711.2 mm |
| N1 | 34.925 mm |
| R1 | 120.65 mm |
| R2 | 42.069 mm |
| RG | 1 NPT |
| PG | 1/4 NPT |
| h | 57.15 mm |
| Housing | SAFS 044 KA |
| Stabilizing ring | 2 x 36053-140 |
| Taconite seal | TER 165 |
| End plug (suffix Y) | EPR 23 |
| Max. speed for Taconite seal | 385 r/min |
| P60° | 416 kN |
| P90° | 249 kN |
| P120° | 151 kN |
| P150° | 136 kN |
| P180° | 160 kN |
| Pa | 59.6 kN |
| Mass pillow block | 208 kg |
| Cap bolt | 1 1/8-7 UNC |
| Cap bolt recommended tightening torque | 1735.4 N·m |
| Cap bolt, SAE grade | 8 |
| Eye bolt | 2 x 1/2-13 UNC |
| Appropriate attachment bolt size G | 1.25 in |
| Initial grease fill | 1672.65 g |
60.30.0550.100.11.1504 Standard 5 Slewing Ring Bearings
62.20.0544.500.01.1503 Standard 5 Slewing Ring Bearings
62.20.0544.575.01.1403 Standard 5 Slewing Ring Bearings
232.20.0500.503 Type 21/650.2 Standard 5 Slewing Ring Bearings
232.20.0500.013 Type 21/650.2 Standard 5 Slewing Ring Bearings
232.21.0575.013 Type 21/650.2 Standard 5 Slewing Ring Bearings