| Db - Cup Backface Backing Diameter | 603.00 mm |
| B - Cone Width | 80.963 mm |
| d | 489.026 mm |
| Cup Part Number | 243250 |
| Ab - Cage-Cone Frontface Clearance | 4.3 mm |
| R - Cone Backface To Clear Radius1 | 6.35 mm |
| Cg - Geometry Factor | 0.235 |
| Series | 243000 |
| K - Factor7 | 1.7 |
| G2 - Heat Generation Factor (Rib-Roller End) | 726.6 |
| da - Cone Frontface Backing Diameter | 515.87 mm |
| Bearing Weight | 40.3 Kg |
| Aa - Cage-Cone Backface Clearance | 6.9 mm |
| a - Effective Center Location3 | 19.1 mm |
| Da - Cup Frontface Backing Diameter | 611.89 mm |
| C90 - Dynamic Radial Rating (90 million revolutions)4 | 85500 lbf |
| C0 - Static Radial Rating | 822000 lbf |
| db - Cone Backface Backing Diameter | 521.97 mm |
| D | 634.873 mm |
| C - Cup Width | 63.500 mm |
Sponsored products related to VLA200744-N INA Slewing Ring Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | Weight | Inventory | Manufacturer Name | Minimum Buy Quantity | ||||
| VSI200744-N | INA | 69.454 | 0.0 | SCHAEFFLER GROUP | N/A | ||||
| VSU200744 | INA | 62.269 | 0.0 | SCHAEFFLER GROUP | N/A | ||||
| VLA200744-N | INA | 65.023 | 0.0 | SCHAEFFLER GROUP | N/A | ||||
| VLI200744-N | INA | 61.726 | 0.0 | SCHAEFFLER GROUP | N/A | ||||
| VSA200744-N | INA | 70.651 | 0.0 | SCHAEFFLER GROUP | N/A | ||||
| L6-29P9Z Rotek Slewing Ring Bearings | Jmin:285 mm; Shaft Diameter d:2 11/16 in; N:22 mm; H:212 mm; Max Grease Speed:3400; Housing Mass:14 Kg; End Cover2:EC519-616; H1:112.0 mm; Seal:LO616/ 2-11/16; J:290.00 mm; Bearing:21316K; H2:35.0 mm; Seal Type:Labyrinth; L:345.00 mm; Housing:SNT 519-616; G:M20; A1:100 mm; C1 Dynamic Load Rating:363 |
| L6-29E9ZD Rotek Slewing Ring Bearings | Bearing - Housing - Seal UPC:013992071767; Dimension V:0.2 in; Dimension H:5.4 in; Bearing - Housing - Seal:MSE715BXHRSS; Cor - Static Load Rating:340810 lbf; Dimension L:10.1 in; Dimension N:19.375 in; Shaft Size:7-15/16 in; Bearing Type:Split Cylindrical Ex; Support Type:Round Flange; Maximum Spee |
| R8-30N3 Rotek Slewing Ring Bearings | Tolerance1:-0.004 in; B2:2.636 in; SNW/SNP Assembly Weight:3.02 lb; S:0.782 in; D1:4.661 in; Taper:1:12; Sleeve:S-18; Lockwasher and Lockplates:W-18; Locknut:AN-18; Diameter d :3 3/16 in; Bearing Number:22218K; Series:222K; |
| L6-29E9Z Rotek Slewing Ring Bearings | K - Factor7:1.24; Cg - Geometry Factor8:0.187; C1 - Dynamic Radial Rating (1 million revolutions)1:206000 lbf; C0 - Static Radial Rating:432000 lbf; R - Cone Frontface To Clear Radius2:0.060 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:92900 lbf; C1 - Dynamic Radial Rating ( |
| L6-29N9Z Rotek Slewing Ring Bearings | Dimension F:7.44 in; Housing Style:Four-Bolt Square Fla; Full Timken Part Number:QVFK15V208SB; Pre Install Clearance Max:0.0037 in; Dimension BC:8.5 in; Dimension H:1.06 in; Shaft Tolerance:0.0015 in; Float:0.083 in; Eng Internal Radial Clearance - Min:0.0030; Dimension RV:0.39 in; e - Geometry Fact |
| M5-26P1Z Rotek Slewing Ring Bearings | Cr - Dynamic Load Rating:42145 lbf; Bearing Type:Split Cylindrical Re; Cor - Static Load Rating:52033 lbf; Series Type:Light Series; Dimension H :4 in; Dimension L :13-5/8 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension J2 :10-3/8 in; Dimension H2:8.95 in; Shaft Size:3- |
| L6-29P9ZD Rotek Slewing Ring Bearings | Tensioning Unit Type:Push Type; Dimension S:3.6 in; Maximum Speed:1320 rpm; Series Type:Medium Series; Dimension P:1.0 in; Note:This product line wa; Bearing - Housing - Seal UPC:013992062468; Ca - Axial Load Rating:11780 lbf; Dimension U:0.4 in; Dimension H:2.5 in; Support Type:Take-Up; Bearing Typ |
| A14-33N1 Rotek Slewing Ring Bearings | Series:78000; C90 - Dynamic Radial Rating (90 million revolutions)5:11800 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:17500 lbf; d:2.2500 in; G2 - Heat Generation Factor (Rib-Roller End):19.1; Cg - Geometry Factor:0.0884; db - Cone Backface Backing Diameter:3.27 in; Cone Part Number: |
| M4-26P4 Rotek Slewing Ring Bearings | D:8.5000 in; Aa - Cage-Cone Backface Clearance:0.17 in; Ab - Cage-Cone Frontface Clearance:0.11 in; Cg - Geometry Factor11:0.134; Y - ISO Factor9:1.23; db - Cone Backface Backing Diameter:6.22 in; C - Cup Width:1.3750 in; T1 - Bearing Width:1.8750 in; C1 - Dynamic Radial Rating (1 million revolution |
| M4-26P4Z Rotek Slewing Ring Bearings | Y2 - ISO Factor6:3.02; Cg - Geometry Factor7:0.159; Design Units:Imperial; Y - ISO Factor1:1.8; e - ISO Factor4:0.33; D:15.0000 in; Y1 - ISO Factor5:2.03; Da - Cup Frontface Backing Diameter:14.33 in; Series:M252300; C - Double Cup Width:4.8750 in; r - Cup Frontface To Clear Radius2:0.06 in; K - Fac |
VLA200744-N INA Slewing Ring Bearings Video
INA VLA200744-N | Purvis Industries
VLA200744-N. Slewing rings > 440 mm = 900 mm. CP#:; Item#: 347595; Mfr#: VLA200744-N; UPC: 4012802075878. Min. Order Qty: 1; Qty. Interval: 1
INA VLA200744-N bearing_INA VLA200744-N
INA VLA200744-N bearing,Type: INA Slewing rings d i 634 Tolerance: +0,6 D a 838,1 D i 745,5 Tolerance: +0,6 D i ZT 747 Valid for bearings with centring (suffix
VLA200744N Slewing ring 4 point contact
INA VLA200744N Slewing ring 4 point contact. View additional description. Call or Chat for lead time confirm availability; Typically ships in: 1 day; Weight: 1.0 lb
Ina USA Corp. | VLA200744-N | SLEWING RING, 4 POINT
Shop Ina USA Corp. VLA200744-N at Applied.com, which includes; Ball Bearing, 634 mm ID, 838.1 mm OD,56 mm Width
Four point contact bearings VLA200744-N (Series VLA20)
Four point contact bearings VLA200744-N. (Series VLA20) light series 20, external gear teeth, lip seals on both sides. The datasheet is only an overview of
INA VLA200744N Bearing, NOKS Bearings
INA VLA200744N Bearing Bearing, INA VLA200744N Bearing Bearings size and price
VLA200744-N Flanged Four point contact bearing (External
BRS specialized in producing INA Structure VLA200744-N Four point contact bearing (flanged inner ring,external gear teeth), and other precision slewing
INA (Schaeffler) - VLA200744-N - Motion Industries
Buy INA (Schaeffler) Slewing Rings VLA200744-N direct from Motion Industries. Your proven service leader with reliable delivery since 1972
Four point contact bearings - VLA200744-N - medias
Di, 745,5 mm, Tolerance: +0,6/0. Di ZT, 747 mm, Valid for bearings with centring (suffix ZT) Centring lengths (T, t) (see dimension drawing) Tolerance: +IT8
VLA200744-N INA • ABF Store
VLA200744-N INA available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8