A12-125P1 Rotek Slewing Ring Bearings
| Brand Name: |
Rotek |
| Model Number: |
A12-125P1 |
| da: |
198.438 mm |
| Da: |
339.999 mm |
| Ca: |
101.803 mm |
| A1: |
190.5 mm |
| A2: |
339.725 mm |
| ba: |
80.169 mm |
| H: |
400.05 mm |
| H1: |
200.025 mm |
Product Details
| da |
198.438 mm |
| Da |
339.999 mm |
| Ca |
101.803 mm |
| A1 |
190.5 mm |
| A2 |
339.725 mm |
| ba |
80.169 mm |
| H |
400.05 mm |
| H1 |
200.025 mm |
| H2 |
79.375 mm |
| J min. |
549.275 mm |
| J max. |
619.125 mm |
| J1 |
114.3 mm |
| L |
711.2 mm |
| N1 |
34.925 mm |
| R1 |
120.65 mm |
| R2 |
42.069 mm |
| RG |
1 NPT |
| PG |
1/4 NPT |
| h |
57.15 mm |
| Housing |
SAFS 044 KA |
| Stabilizing ring |
2 x 36053-140 |
| Taconite seal |
TER 165 |
| End plug (suffix Y) |
EPR 23 |
| Max. speed for Taconite seal |
385 r/min |
| P60° |
416 kN |
| P90° |
249 kN |
| P120° |
151 kN |
| P150° |
136 kN |
| P180° |
160 kN |
| Pa |
59.6 kN |
| Mass pillow block |
208 kg |
| Cap bolt |
1 1/8-7 UNC |
| Cap bolt recommended tightening torque |
1735.4 N·m |
| Cap bolt, SAE grade |
8 |
| Eye bolt |
2 x 1/2-13 UNC |
| Appropriate attachment bolt size G |
1.25 in |
| Initial grease fill |
1672.65 g |